Turbine water meters ÂT-(Äó)Õ are intended for measurement of volume of cold delivery water coming through the pipeline at the temperature from 5˚C up to 40˚C and operating pressure of the water supply system no more than 1,0 MPa (10 kgf/cm²). Turbine water meters ÂT-(Äó)Ã (single-jet, dry) are intended for measurement of volume of hot delivery water coming through the pipeline at the temperature from 5°C up to 90°C and operating pressure of water supply system no more than 1,0 MPa (10 kgf/cm²). The hot water meters can be used for cold water metering. This model of the meter can be modified for measurements of the volume of hot water, coming through the pipeline at the temperature from 5°C up to 150°C and operating pressure in the water supply system no more than 1,6 MPa (16 kgf/cm²).
The meters ÂT can be additionally equipped with a sensor (reed relay) for remote transfer of low-frequency pulses. The transfer factor (pulse value) should be indicated at the order by the consumer. It can be - 100; 1000; 10000; 100000 l/imp.
In case of equipping of the meters ÂT with pulse sensors of any pulse value, the marking will have “È” letter on it.

METER ÂÒ
Nominal bore diameter	50; 65; 80; 100; 125; 150; 200; 250
Rated consumption m³/hour	15; 25; 40; 60; 100; 150; 250; 400
Water	yes; no
Pulse output	yes; no
Field of application	industrial
Counter type	turbine
Case material	Pig iron